1st Edition
Bituminous Mixtures and Pavements VII Proceedings of the 7th International Conference 'Bituminous Mixtures and Pavements' (7ICONFBMP), June 12-14, 2019, Thessaloniki, Greece
Highway engineers are facing the challenge not only to design and construct sustainable and safe pavements properly and economically. This implies a thorough understanding of materials behaviour, their appropriate use in the continuously changing environment, and implementation of constantly improved technologies and methodologies. Bituminous Mixtures and Pavements VII contains more than 100 contributions that were presented at the 7th International Conference ‘Bituminous Mixtures and Pavements’ (7ICONFBMP, Thessaloniki, Greece 12-14 June 2019). The papers cover a wide range of topics:
- Bituminous binders
- Aggregates, unbound layers and subgrade
- Bituminous mixtures (Hot, Warm and Cold)
- Pavements (Design, Construction, Maintenance, Sustainability, Energy and environment consideration)
- Pavement management
- Pavement recycling
- Geosynthetics
- Pavement assessment, surface characteristics and safety
- Posters
Bituminous Mixtures and Pavements VII reflects recent advances in highway materials technology and pavement engineering, and will be of interest to academics and professionals interested or involved in these areas.
Session I: Bituminous binders
Recycled waste plastic modification of bituminous binder
Greg White & Gordon Reid
Rheological properties of fresh and RAP bitumen blends with or without regenerating agent
A. Forton, H. Di Benedetto, S. Mangiafico, C. Sauzéat & P. Marc
Calorimetry of Cement Modified Emulsified Asphalt incorporated with Rice Husk Ash
Zhuangzhuang Liu, Zhenqiang Han & Aimin Sha
Fatigue resistance of asphalt mastic by Dynamic Shear Rheometer testing
M. Hospodka & B. Hofko
Evaluation of fatigue parameters on polymer modified waxy bitumens
J. Oner & B. Sengoz
Investigation of the ship-generated waste as binder modifier
H.I. Ozturk, F. Kamran & M. Guler
Experimental study of bituminous binders’ viscosity and structure
E. Remisova, M. Holy & V. Zatkalikova
Aging behavior of bitumen and elastomer modified bitumen
J. Zicans, T. Ivanova, R. Merijs-Meri, R. Berzina & V. Haritonovs
Development of polyolefine elastomer modified bitumen and characterization of its rheological and structural properties
R. Merijs-Meri, A. Abele, J. Zicans & V. Haritonovs
Bond strength recovery of tack coat in RCC-base composite pavements
Young Kyu Kim, Seung Woo Lee, Kyong Ku Yun, In Tae Kim & Cheol Woo Park
Impact of aging on Gilsonite and Trinidad Epuré modified binders resistance to cracking
M. Bilski & M. Słowik
Effects of a surfactant-wax additive based on the activation energy and aging index of asphalt binders
B. Golchin, M.O. Hamzah & C. Raab
Modeling of creep and recovery of Gilsonite and Trinidad Epuré modified asphalt binders
M. Słowik & M. Bilski
Rheo-mechanical analysis of bitumens produced with green binder extenders
G. Tarsi, F. Mazzotta & C. Sangiorgi
Impact of seasonal fluctuations and provenience of bitumen on lifetime of asphalt pavement
P. Sivapatham & N. Simmleit
Session II: Aggregates, unbound layers and subgrade
Re-evaluation of Polished Stone Value and British Pendulum Tester data to better understand aggregate polishing
M. Mac Nicholas & D. Woodward
Gene expression programming based prediction of Uncompacted Void Content of aggregate
Abhary Eleyedath, Aravind Krishna Swamy & G. V. Ramana
Shear strength behavior of stabilized unsaturated expansive subgrade soils for highway backfill
I. Frank Aneke, M. Mostafa Hassan & A. Moubarak
Prediction model for subgrade soil resilient dynamic modules utilizing basic soil characteristics for the state of louisiana
Mayzan Isied & Mena Souliman
Session III: Bituminous mixtures (Hot, Warm and Cold)
Graphite modification of an AC to mitigate UHI effects
A.T. Papagiannakis & R. Kaphleb
Effect of moisture on the adhesion of aggregate–binder systems
P.D.C. Nageswaran, A. Varveri, A. Scarpas & S. Mohan
Development of a Ravelling test for asphalt
J.C. Nicholls, M.M.J. Jacobs, E. Schoen, D. van Vliet, S. Mookhoek, N. Meinen, J. De Visscher, A. Vanelstraete, G.G. van Bochove, F. Hammoum, T. Blumenfeld, S. Bohm & C. Schulze
Impact of laboratory compaction-based HMA stiffness on flexible pavement analysis
P. Georgiou, A. Loizos, A. Leventis & K. Gkyrtis
VAPro – long-term ageing of HMA based on highly oxidant gases
D. Maschauer, D. Steiner & B. Hofko
Comparison of shear strength parameters obtained from different protocols for wearing course mixtures
N.T. Tran & O. Takahashi
Determination of bitumen stone coverage by digital image processing
J. Blom, B. De Boeck & H. Soenen
Developing the next generation of asphalt surfacings, from conception to road trials
C. Ojum, I. Widyatmoko, R. Hudson-Griffiths, A. Khojinian, D. Giles, M. Lancaster, G. Schofield, C. Southwell, D. Markham, M. Simms & T. Smith
Effects of reclaimed asphalt and warm mix asphalt on the availability of the road network
J.C. Nicholls, M. Wayman, A. Varveri, S. King & S. Cassidy, K. Mollenhauer, C. McNally & A. Tabakovic
Physical and mechanical properties of warm mix asphalt composed of recycled concrete aggregates
J. Neves, J. Lameirão & A.C. Freire
Accelerated durability testing of preserved asphalt mixtures using the Immersion Ageing test
C. Ojum, I. Widyatmoko, A. Khojinian & N. Thompson
Cyclic interlayer testing in bituminous pavements
D. Ragni, A. Graziani & F. Canestrari
Effect of curing on the indirect tensile failure energy of cement-bitumen treated materials
C. Mignini, F. Cardone, A. Graziani, A. Morbi & L. Setti
Improving the quality of emulsion-mineral mixtures
B.G. Pecheny, A. Nikolov & S. Nikolova
Use of stabilized blast furnace slag in asphalt mixtures
Pavla Vacková & Jan Valentin
Long term performance of HMAs having up to 100% of municipal incinerator sands
E. Toraldo, E. Mariani, D. Topini & M. Crispino
Whitish and rusty stains on bituminous wearing course: Possible causes
N. Ciont, M. Iliescu, G. Hoda & N. Har
The SCB configuration for the determination of the dynamic modulus of asphalt mixtures
S.M. Angelone, M. Cauhape Casaux & F.O. Martinez
Asphalt concrete mechanical behavior prediction by Artificial Neural Networks
M. Pasetto, N. Balbo & E. Manthos
A method for determining the appropriate frequency for testing asphalt mixtures in the laboratory
Saman Barzegari & M. Solaimanian
Synthesis and characterization of encapsulated healing agents for asphalt
R. Casado Barrasa, C. Martin-Portugués Montoliu, L. Miranda Pérez & F.J. Lucas Ochoa
Comparison of uniaxial tension-compression fatigue test results with SCB test performance indicators developed for performance-based mix design procedure
A. Seitllari, M. Lanotte & M.E. Kutay
Characterization of hot mix asphalt patching materials produced with medium-scale field mixing equipment
Ben C. Cox & John B. Sprouse
Experimental investigation on performance of asphalt mixture with aggregate of acid migmatite – a case study
Erhu Yan, Zhenyu Zhou, Yongchun Qin, Jie Wang, Songchang Huang, Yan Gong & Xuewen Huang
A study on the field application of ultra-thin hot mix asphalt with CSM modifier for sustainable road in Korea
Y.I. Kim & N. Moustapha
The effect of oxidative aging to characteristic properties of semi-open AC with blast furnaced slag and to penetration and softening point of recovered bitumen
E. Manthos & A. Nikolaides
Development of probabilistic S-N curve using small sample data
Himanshu Sharma & Aravind Krishna Swamy
Session IV: Pavements (Design, Construction, Maintenance, Sustainability, Energy and environment consideration)
Determination of asphalt layer thickness above which load-induced strains initiate top-down cracking and the effect of asphalt stiffness variation between wearing course and rest of asphalt layers
A. Nikolaides & E. Manthos
Improving pavement’s properties using the AMIR II compactor
Christiane Raab, Abd El Halim Omar Abd El Halim & Anandkumar Rajendran Chelliah
A methodology to design the asphalt field compaction process in the laboratory to provide clear guidelines for roller operators
F.R. Bijleveld, A.H. de Bondt & R.N. Khedoe
The use of thermal infrared line scanner as a qualitative tool for asphalt paving process – a case study
G. Jacobs, W. Van den bergh, J. Blom & L. Lauriks
Sensitivity analysis of mechanistic-empirical pavement structural design methods considering climate impacts on layer modulus values
W. Uddin, Rulian Barros & Zul Fahmi M. Jaafar
The permissible temperature of newly laid asphalt at opening to airfield traffic
T. Rahman, A. Dawson & N. Thom
Comparing asphalt preservation products on a grooved runway
Greg White, Fraser McLachlan & Scott Wallace
Designing airfield pavements to prevent distresses and enhance aircraft safety
J.V. Merighi & W. Uddin
Experimental investigation of temperature distribution in non-heated and pre-heated hot mix asphalt patch repair
J. Byzyka, M. Rahman & D.A. Chamberlain
A methodology to quantify the impact of climate change on the state of good repair of pavements
C.M. Chang & O. Ortega
Field performance of hot applied modified binder chip seal in California
A. Rahim, S. Saadeh, O. Aljairi & D. Cheng
An eco-efficient induction healing approach for asphalt mixtures
M. Vila-Cortavitarte, D. Jato-Espino, D. Castro-Fresno & M.Á. Calzada-Pérez
The selection of pothole repair options
J.C. Nicholls, M. McHale & I. Carswell
Transportation infrastructure impact: Energy and environmental life cycle assessment
M. Giunta, M. Mistretta, F.G. Praticò & T.M. Gulotta
Solar pavement: A new source of energy
Fotini Kehagia, Stefania Mirabella & Constantinos S. Psomopoulos
Field evaluation of a sustainable road structure concept
R. Casado Barrasa, C. Martín-Portugués Montoliu, K.J. Kowalski & J.B. Król
Incorporation of reliability in the pavement design process: Concepts and issues
Abhishek Mittal & Aravind Krishna Swamy
Large-scale investigations of precast concrete slabs
J. Patzak & P. Bolz
Session V: Pavement management
NDT platform for structures management and decision support in emergency situations
F.G. Praticò, R. Fedele, M. Merenda, R. Carotenuto & F.G. Della Corte
Cost analysis of a flexible pavement with and without lime stabilization: A provincial road case in Turkey
M. Özgenel
Infrastructure resilience: From concept to performance to decisions
S. McNeil, Y. Liu & A.S. Ramirez-Villamizar
Economic optimisation of road network accessibility
M.R.F. Amrozi & H.T. Evdorides
Functional maintenance evaluation targets for flexible runway pavement
L.F. Merighi & C.Y. Suzuki
Evaluation of pavement maintenance and strengthening techniques
A. Mouratidis, C.G. Daniilidou & G.P. Papageorgiou
Session VI: Pavement recycling
Influence of mixing procedures on the performance of asphalt mixtures with high reclaimed asphalt content
A. Margaritis, G. Jacobs, N. Hasheminejad, J. Blom & W. Van den Bergh
Experimental investigation of the re-recycling of RAP in asphalt pavement
D. Wang, A. Cannone Falchetto, K.H. Moon, C. Riccardi & M.P. Wistuba
Incorporating RAP into airport asphalt resurfacing
Greg White
Cold recycling of reclaimed asphalt: Analysis of alternative procedures
M. Pasetto, A. Baliello, G. Giacomello & E. Pasquini
Quality-control procedure for dry-process rubberised asphalt mastics
A. Astolfi, A. Subhy, F.G. Praticò & D. Lo Presti
The performance of asphalt concrete with increased RA content – laboratory design vs. trial section
Pavla Vacková & Jan Valentin
Laboratory evaluation of Dense Bituminous Macadam prepared using Recycled Concrete Aggregate
K. Tanveeer Bhushan & S. Shankar
Effect of Cyclogen as rejuvenator in 100% recycled asphalt mixtures
Ali Moniri, Mahmood Khadem & Yasha Saghafi
Session VII: Geosynthetics 587
Fatigue resistance of a grid-reinforced asphalt concrete using four point bending beam test
M. Orešković, S. Trifunović, G. Mladenović & Š. Bohuš
Performance testing of a steel cord based crack-preventing interlayer
F. Vervaecke, H. Cornelus & P. Straubinger
Parameter to ensure a durable grid-reinforced asphalt pavement
Andreas Elsing & Fabiana Leite-Gembus
Session VIII: Pavement assessment, surface characteristics and safety
Performance assessment of non-conventional pavements using back-analysis techniques
V. Papavasiliou, A. Loizos, C. Plati & T. Stergiou
Comparing mother wavelet selection criteria for road pavements NDT monitoring
R. Fedele, F.G. Praticò, R. Carotenuto, and F.G. Della Corte
Surface properties of porous asphalt concretes: Time, position, and treatment impact
F.G. Praticò, G. Colicchio, R. Fedele & P.G. Briante
Measuring skid resistance of grooved pavements
L. Chu & T.F. Fwa
From Mean Texture Depth to Mean Profile Depth: Exploring possibilities
C. Plati, M. Pomoni & T. Stergiou
FE model of circular Accelerated Pavement Testing setup to study the optimal layout configuration of multiple pavements
S. Aggarwal, K. Anupam, T. Tang, C. Kasbergen, S.M.J.G. Erkens & A. Scarpas
Laboratory investigation of the landing aircraft tire contact patch
J. Ferguson, D. Woodward & P. Millar
A practical approach to determine asphalt concrete material properties based on non-destructive testing
I. Boz & M. Solaimanian
Criteria for the selection of safety barriers systems on road networks
A.L. Nikiforiadis & A.A. Nikiforiadis
Life-cycle safety rating of road maintenance works
A.E. Azmi & H. Evdorides
Application of machine learning techniques to predict asphalt pavement surface deteriorations
R. Muzzulini, M. Pagola & O. Giovanon
Poster Session
Influence of filler types and their quantities on bitumen-aggregate adhesion
J. Choudhary, B. Kumar & A. Gupta
Performance of asphalt determined by the tensile creep test on binder and asphalt mortar
F. Bommert & F. Münscher
MSCR analysis of rubberized asphalt binders containing wax additives
Soon-Jae Lee, Soo-Ahn Kwon, Sung-Il Jeon & Moon-Sup Lee
Impact of synthetic fibres on asphalt concrete mix
C.G. Daniel, X. Liu, P. Apostolidis, S. Erkens & A. Scarpas
Biography
A.F. Nikolaides, Aristotle University of Thessaloniki (AUTh), Greece
E. Manthos, Aristotle University of Thessaloniki (AUTh), Greece