1st Edition
Power Transmissions Proceedings of the International Conference on Power Transmissions 2016 (ICPT 2016), Chongqing, P.R. China, 27-30 October 2016
This book presents papers from the International Conference on Power Transmissions 2016, held in Chongqing, China, 27th-30th October 2016. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and a range of applications. The presented papers are catalogued into three main tracks, including design, simulation and testing, materials and manufacturing, and industrial applications.
The design, simulation and testing track covers topics such as new methods and designs for all types of transmissions, modelling and simulation of power transmissions, strength, fatigue, dynamics and reliability of power transmissions, lubrication and sealing technologies and theories, and fault diagnosis of power transmissions. In the materials and manufacturing track, topics include new materials and heat treatment of power transmissions, new manufacturing technologies of power transmissions, improved tools to predict future demands on production systems, new technologies for ecologically sustainable productions and those which preserve natural resources, and measuring technologies of power transmissions. The proceedings also cover the novel industrial applications of power transmissions in marine, aerospace and railway contexts, wind turbines, the automotive industry, construction machinery, and robots.
Aeronautic transmissions
Research on the parametric design of high-speed accessory transmission gears
J.Q. Tan, J.W. Jiang & H.T. Zhou
Test technique research on accessory gear box of aero-engine
Q.L. Chen, P. Jiang, D.C. Lei & X.Y. Huang
Effect of air bubbles in the viscous damper silicone oil on damping property
W. Yang, P. Wang & J. Wang
Analysis of the technical characteristics of tilt rotor drive system
Q. Wang, Y. Wang & M. Yin
Technical research on the rotor shaft integrated with rotor hub
W. Liu & F. Li
Technical characteristics and trend of power transmission system of new configuration rotorcraft
Z. Yin, B. Hu, Q. Wang & M. Yin
The design of transverse flux PMDCM for electric direct driving
Y. Zhou, Y. Han, Y. Mi, L. Chen & X. Qi
Belt, chain and other transmissions
Belt-pulley friction coefficient, experimental analysis: Influence of the Poly-V belt material components and contact pressure
L. Manin, C. Lorenzon & H. Saad
μ synthesis control of the active magnetic bearing system
L. Wang, Ch.W. Jin, J. Zhou & Y.P. Xu
Research on the design and performance of face seal in bearing chamber
Q.-F. Li & X.-Y. Wang
Analysis of the dynamics of timing silent chain system with hydraulic extender
G. Zheng, Z. Liu & R. Feng
Variable speed control strategy and experimental research of the shearer
J.J. Hu, T. Pang, C.J. Sun & C.Z. Liu
Test and analysis of new high-speed cross-spiral roller cam
G. Wang, H. Du, L. He & L. Yu
Mechanical property analysis and finite element simulation of cross steel equal-speed mechanism
P. Zhang, B. Bao & Y. Zhang
Investigation of a control method of impact forces for a floated support friction plate
K. Ning, K. Zhang, D. Yu, Z. Chen, M. Han & Z. Hu
Multi-physics simulation of a vehicle claw-pole alternator
Q.-Z. Zhang, Y.-S. He, Z.-M. Xu & Z.-F. Zhang
Research on the thrust force reduction effect of balance holes on a turbine hub in a hydrodynamic torque converter
Q.-D. Yan, L. Tan & W. Wei
Contact analysis
Parametric finite element modeling and transmission error analysis of cylindrical gears including profile modification
Y. Wang, W. Tang & P. Liu
Determination of load distributions on double helical geared planetary gear boxes
T. Schulze & K. Riedel
A new FE contact model of a spur gear set for quasi-static analysis
H. Dong, X. Wang, C. Zhang & D. Wang
Tooth contact and load distribution analyses of cycloid drives with tooth profile modification
X. Li, C. Li, B. Chen, Y. Wang, T.C. Lim & S. Wang
Effect of oil film stiffness and the tooth friction force on time-varying meshing stiffness of a spur gear pair
Z. Li, C. Zhu, H. Liu, C. Song & Y. Zhang
Contact analysis of a cycloidal-pin gear drive mechanism with turning arm cylindrical roller bearings
L.X. Xu & L. Han
Techniques for the calculation of gear pair mesh stiffness
C.G. Cooley, C. Liu, X. Dai & R.G. Parker
An ease-off based methodology for contact detection and penetration calculation
M. Vivet, G.H.K. Heirman, T. Tamarozzi, W. Desmet & D. Mundo
The influence of element size on the spatial contact behavior of a cylinder and plate in finite element analysis
D. Li, Y.-L. Han, Y.-M. Hu & R.-H. Wang
Elasto-plastic contact characteristics of the Planetary Roller Screw Mechanism
R.T. Tong, H. Guo, G. Liu & Q. Yao
Contact stress analysis of aeronautic gear based on rough tooth surface
S.W. Yang
Effects of friction on the time-varying mesh stiffness of helical gears
L. Han, L. Xu, Y. Liu & H. Qi
A rough surfaces contact pressure analysis between meshing gears based on a GW model
Y. Wen & J. Tang
Drive train dynamics
Effects of model complexity on torsional dynamic responses of NREL 750 kw wind turbine drivetrain
H. Al-Hamadani, H. Long & M. Cartmell
The effect of the support stiffness of rotor on vibrations for a rotor-roller bearing system
J. Liu, S. Feng, Y. Shao & B. Shi
Modeling of axle system with emphasis on tapered roller bearing contact analysis and stiffness calculation
Y. Wang, T.C. Lim, X. Li & Y. Zhang
Analysis of dynamic characters of pilot operated spool valve with notches
H. Li, Y. Qi, W. Wei, Q. Yan, H. Jian & L. Kong
Comparative system dynamic modeling of a conventional and hybrid electric powertrain
M. Awadallah, P. Tawadros, P. Walker & N. Zhang
Impact of rolling element bearing models on static behavior of planetary gears
Y. Wu, C.G. Cooley & R.G. Parker
FEM with different dimensions for vibration analysis of a transmission system
X. Cai, X. Wang & X. Tan
Study on the cranktrain transient impact caused by DMF
J. Yang, X. Li, Z. Zheng, T. Hu & F. Li
Research on the load sharing of wind turbine gearboxes with flexible pins
Z. Fan, C. Zhu, Y. Qiu, C. Song, H. Liu & H. Bai
Wind load calculation and compiling spectrum of a wind turbine gear transmission system under multiple excitation sources
Z.G. Zhou & F. Xu
Design and dynamic simulation of the parking system for DCT
J. He, Z. Zhan, T. Hu & B. Yu
Durability and fatigue
Test on the bending fatigue properties of 18CrNiMo7-6 gear material
J. Li, Z. Zhang, S. Yan & Z. Liu
Fatigue life prediction of planet carrier based on the experiments of notch specimen of Ti-6Al 4V
X. Cai, C. Wu & J. Liu
Influence of hardening pattern, base material and residual stress condition on the tooth root bending strength of induction hardened gears
F. Dobler, T. Tobie, K. Stahl, D. Nadolski, M. Steinbacher & H.F. Hoffman
Influences of load distribution on the pitting load carrying capacity of cylindrical gears
D. Kadach, T. Tobie & K. Stahl
Investigation on the tooth root bending strength of gears with special involute tooth shape
C. Weber, T. Tobie & K. Stahl
Stress concentration and fatigue strength of involute spline shafts and couplings
J. Wendler & B. Schlecht
Application of image recognition to the analysis of the gear contact fatigue test
J. Zhao
The influence of the electron beam/CrN-coating-based compound process on the 40Cr steel sample’s rolling contact fatigue behaviors
J.-J. Hua, S.-B. Deng, H.-B. Xu, H. Lia, C.-P. Ma & Y.-Q. Zhang
Reliability analysis of the planet transmission gearbox considering load sharing
C.F. Hu, Y. Yang, Y.Q. Tan, R.T. Peng, X.Z. Tang & Z. Liu
Research on the fatigue property of magnesium alloy WE43 A sampled from foundry housing
T. Lu, J. Xie & Z. Wan
Research on the relationship between the case depth, safety factor and reliability of case carburized gears
W. Xaio, Z. Liu & L. Meng
A study on the fatigue endurance experimental technology of the rack for the Three Gorges shiplift
Z. Liu, Z. Wang, Q. Li & Y. Li
Effects of surface integrity on gear performance
J. Qiao, Z. Wu, T. Wang & T. Yan
Performance of gears with WC/C coating
J. Zhang & B.A. Shaw
Efficiency and power loss
Analysis of energy dissipation mechanism for gear transmission with particle damper under centrifugal field
W. Xiao, Z. Chen, T. Pan & Y. Huang
Modelling of power losses in poly-V belt transmissions: Influence of design parameters
C.A.F. Silva, L. Manin, E. Besnier, D. Remond, M.A. Andrianoely & R.G. Rinaldi
Efficiency modeling and analysis for the nutation drive with double circular arc spiral bevel gears
W.T. Ji, L.G. Yao, J. Zhang, J.L. Hong & W.J. Li
A new calculation method of meshing efficiency for spur gear based on EHL model
J.-F. Yang, F.-X. Lu, Q.-W. Zhang & W.-P. Liu
Calculation of the behavior of oil churning and its loss in a gear box by a moving particle method—the first result of both calculation and experiment
T. Iino, S. Matsumura, H. Houjoh & T. Hachiya
Efficiency modeling and experiment of the 2-speed AMT for pure electric vehicle
D. Hu, Y. Liu, D. Qin & B. Wang
How can the simulation of rolling bearing friction support increased energy efficiency of transmissions?
O. Koch, C. Bohnert, B. Marneth & P. Rödel
Analysis of the effect of the parameters of gear on mesh efficiency
J. Zhong & Q. Shi
Analysis of the efficiency of the power coupling mechanism for tracked vehicle transmission based on the graph theory
D. Cheng, Y. Liu, D. Qin, M. Hu & F. Wan
Gear design
On optimum profile relief in thin-rimmed spur and helical gears
B. Guilbert, P. Velex & P. Cutuli
Fillet geometry modeling for nongenerated gear tooth surfaces
A. Fuentes-Aznar, P. Iglesias-Victoria, S. Eisele & I. Gonzalez-Perez
Analysis and optimization of contact ratio of asymmetric gears
A.L. Kapelevich & Y.V. Shekhtman
A study on the influence of web thicknesses on static transmission errors of spur gear drives
J. Wang & Z.M.Q. Li
A study on transmission performances of helical gears with azimuth deviations on tooth flanks
Y. Liu, M. Zhang, M. Chen, Z. Shi & J. Lin
A study on evaluation methods of the gear pitch deviations based on statistical analysis
X. Wang, Z. Shi, Z. Shu & J. Tang
Modeling on the microscopic geometric morphology of ultrasonic grinding gear surface based on grinding wheel micro-morphology
W.H. Zhou & J. Tang
Investigation of the spline design of a turbo-shaft engine
B. Chen
An experimental investigation of bending strength for large modulus involute gears
J. Wei, G. Zhao, D. Qin, F. Meng & X. Ru
Multidisciplinary and multiobjective design optimization of advanced helicopter power transmission system
Z.Y. Yin, D. Mi, L.Z. Zhang, X.X. Cai & H.M. Wu
Research on the time-varying characteristics and applications of curve-face gear pair
Z.Q. Cai, C. Lin, Y. Liu & X.L. Zhao
Study on the factors affecting load sharing in split path transmission
B. Fu, J. Gao, N. Zhao, W. Li, R. Zhou & L. Sun
Gear dynamics
Natural mode analysis of a helical planetary gear set
L. Zhang, Y. Wang, R. Sheng & K. Wu
Effects of tooth modification on dynamics of helical gear system
J. Wang, S.-Y. Bian, L.-G. Yao & J. Zhang
Research on dynamic characteristic of wind turbine gearbox considering elastic support
S. Wang, H. Bai, C. Zhu, C. Song & H. Liu
On the effects of blank lightweighting on gear dynamics
S. Shweiki, J. Korta, A. Palermo, D. Mundo & G.H.K. Heirman
Mechanism analysis on coupled bending-torsional vibrations of a rotor-bearing system due to unbalanced force and hertzian contact force
Z. Liu, Y. Li, Z. Dou, M. Du & Y. Yang
Multi-mesh dynamic models based on transmission errors
N. Sainte-Marie, P. Velex, G. Roulois & J. Caillet
Dynamic modelling and vibration analysis of a planetary gear set
Z.G. Wang, Y.F. Liu, J.B. Lai & X.Y. Xu
The dynamic coupling behaviour of a cylindrical gear pair subjected to eccentricities
W. Yu, C.K. Mechefske & M. Timusk
Dynamic behavior of planetary gears with compliant ring-gears and supporting structures—influence of profile and lead modifications
M. Chapron, P. Velex & S. Becquerelle
Vibration transmission through a multiple-degrees-of-freedom system subjected to shock excitation
H.F. Xiao, Y.M. Shao & X.J. Zhou
The effect of shaft angles on dynamic load and load sharing characteristics of the split torque transmission system
L. Qian, J. Tang & S. Chen
Study on the dynamics of high-speed-ratio planetary gear transmissions with low-loss gears
Y. Xia & D. Qin
Incremental harmonic balance method for torsional vibration in double-helical gear
J. Dong, S. Wang & H. Lin
Acoustic radiation characteristic of automobile transmission housing
Y. Sun, W. Yang, Z. He & X. Tang
Modeling and analysis of high-speed, compliant, aerospace gear vibration
C.G. Cooley & R.G. Parker
Dynamics modeling and power flow analysis of the planetary gear based on the bond graph
Z. Dou, Y. Li, M. Du & Y. Yang
Two-dimensional basin structures of the gear system under the excitation of dynamic parameters
L. He, S. Wang & J. Dong
Nonlinear dynamic analysis of an external gear system with meshing beyond the pitch point
Y.-Y. Zhang, H.-Y. Bao & L.-L. Li
Study of the modal energy distribution of herringbone planetary gears
F. Ren, G.Q. Shi, G.F. Luo, L.Q. Ji, G.Q. Xiang & D.T. Qin
Dynamic properties of planetary gears with a flexible ring gear
L. Liu, Y.X. Chen, G. Liu, X.H. Yang & X. Wang
Dynamic behavior of the gear system under an alternating temperature environment of space
S.B. Lu, X.Z. Kang, Z.X. Jin & J.W. Shi
Modal analysis of a star-type herringbone gear transmission system
F. Wang, S. Wang & R. Yuan
Analysis of the influences of a flexible gearbox on the dynamic meshing performance of a gear pair
G. Zheng & X. Huang
Dynamic model of multi-tooth meshing including transient elastohydrodynamic effects
L. Liu & J. Zhang
Frequency response analysis of a thin spoke spur gear with damping sleeves
N. Zhao, J. Gao & B. Fu
Effect of sliding friction on the nonlinear dynamics of a planetary gear train with a fixed ring gear
S.-Y. Bian, J. Wang, L.-G. Yao & J. Zhang
Research on models and methods for low-noise design of marine gearing
G. Liu, H. Wang, L. Wu, L. Liu & S. Chang
HEV transmissions
Research on coordinated control strategy for the engine starting of electro-mechanical transmission
H. Zhang, L. Han & H. Liu
Vision-based road lane and obstacle detection for ADAS and supervisory control of intelligent vehicles
H. Wei, Z. Jia, Y. Chen, X. Cao & W. Du
Energy management strategy for four-wheel drive plug-in hybrid electric vehicles
H. Xin, H. Liu & X. Li
Control strategy optimization for an extended-range electric vehicle
S. Chen & M. Hu
Neural network-based driving condition prediction and energy management strategy for power-split HEVs
Z. Zhou, W. Wang, C. Xiang & H. Liu
A review on energy management strategies for plug-in hybrid electric vehicles
T. Deng, J.L. Luo, M.M. Wang & J.Y. Li
Objective evaluation of mode switching and shift quality for a parallel hybrid electric vehicle
B. Du, L.J. Zhou, X.F. Yin & R.H. Yang
Study on the shift sequences of the power shifting transmission for parallel hybrid electric vehicles
X.L. Li, J.B. Hu & Z.X. Peng
PMP-based optimal control strategy for plug-in diesel engine hybrid electric vehicles with aftertreatment
H. Wei, X. Liu & P. Ren
Global optimization transmission ratio schedule for plug-in hybrid electric vehicles equipped with electric-mechanical continuously variable transmission
X. Ma & M. Ye
Hypoid/bevel gears
A calculation method for determination of the bending strength of spiral bevel gears including friction
C.J. Zhou, Z.D. Li & H.C. Wang
A discretized TCA for spiral bevel gear with high-order transmission error
F. Gong, J.-J. Yang & H.-J. Guo
Milling force model of spiral bevel gear based on the theory of oblique cutting and cutting test
C. Jiang, R. Shi, X. Deng & Z. Han
An automatic approach to modeling the CAD model of face-milled spiral bevel gears
Y. Zhou, J. Tang & X. Liu
A novel lean flank designing methodology for spiral bevel gears
X.-M. Cao, X. He, S.-W. Nie & J.-B. Li
The contact characteristics control and CNC face hobbing method of hypoid gear
W. Zhang, X. Guo, B. Chen & M. Zhang
Manufacturing
Mapping rules between the gear hobbing processing technique and gear geometric errors
S. Wang, S. Sun, B. Zhou, Y. Wang & T.C. Lim
Integration operation model for networked closed-loop manufacturing of spiral bevel gears
J.B. Li, A.J. Xu, X.Z. Deng, Z.S. Gao, J.J. Yang, B. Wang, H. Zhang & K. Xu
Design and manufacture of face-milling spiral non-circular bevel gear
L. Hua, F. Zheng, X. Han, D. Chen & B. Li
Sustainable technologies and their application in industrial gearbox development
D. Su & Y. Wu
A novel synchronous coupling precision control method for electronic gearbox
L.L. Wu, J. Han, X.Q. Tian & L. Xia
Effects of and compensation for tooth profile deviations of CNC gear profile grinding machines
S.L. Wang, B.C. Zhou, S.L. Sun & C.G. Fang
Effect of cutting speed on tool life in dry gear hobbing
H. Qiu, A. Kubo & H. Matsuoka
A two-stage retrieval method of similar process case in gear hobbing
W.D. Cao, C.P. Yan & C. Chen
Measurement, condition monitoring and fault diagnosis
Performance evaluation of wireless MEMS accelerometer for reciprocating compressor condition monitoring
Z. Mones, G. Feng, U.E. Ogbulaor, T. Wang, F. Gu & A.D. Ball
Fault diagnosis of rolling bearing based on CEEMD and slice bi-spectrum
J. Bian, C. Huo, L. Lin & P. Wang
Journal bearing condition monitoring based on the modulation signal bispectrum analysis of vibrations
O. Hassin, A. Yao, F. Gu & A.D. Ball
Study of the influence of different roughness on gear wear by oil analysis technology
D. Wang, W. Tie, C. Lv, D. Zhi & W. Liu
Scanning strategy of edge corners in gear outline measurement
S. Kurokawa, Y. Utsunomiya, T. Teraoka, T. Hayashi & T. Taguchi
Analysis of time–frequency characteristics of gear fault signals based on LMD
J. Bian, C. Huo & G. Tang
Gear fault feature extraction based on fractional Fourier transform
H. Chen, Y. Sun, Z. Shi, J. Lin, Z. Yang & C. Long
Gear root crack fault diagnosis using envelope entropy analysis of angular domain vibration signal
F. Guo, C. Gu, B. Zhou, Y. Shao & Y. Yang
Study on the on-line monitoring sensor of tracked armored vehicles
Z. Gao, C.S. Zheng, R. Jia, Z.Q. Liu & J.H. Fan
NVH in power transmissions
NVH performance optimization of a layered cylinder head based on benchmarking
F. Li, T. Hu, J. Yang & X. Li
Influence of brake-line pressure on high-frequency brake noise in the closed-loop coupling model
P. Gao, J. Cui, X. Wang & Y. Qi
Surface topography and lubrication
Micro TEHL research of rough surface in the point contact considering time-varying effect
F. Lu, L. Ai, R. Zhu & H. Bao
Mixed lubrication, friction and running-in of ground surfaces under gear contact conditions
A. Clarke, H.P. Evans & R.W. Snidle
Lubrication film stiffness of a spur gear pair
Y. Zhang, H. Liu, C. Zhu & C. Song
Simulation and analysis of the lubrication system based on Flowmaster
Q. Shi, H. Wu & J. Zhong
Study of jet lubrication performance of ball bearings
Y. Zhang & D. Ruan
The effect of lubricating oil parameters on the efficiency of mechanical and electrical short-range transmission system of shearer
H. Fan, Y. Yang & D. Qin
Mixed elastohydrodynamic lubrication with realistic surface roughness for cylindrical roller bearing
M. Liu, C. Wu, Y. Chen & M. Zhou
Research on frictional performances of laser-textured GCr15 steel under drip lubrication
Z.T. Cheng, M.G. Du & F.M. Meng
Effects of various rheological models on EHL line contact for herringbone gears
Z.L. Xiao, C.J. Zhou & S.Y. Chen
Worm gears
Design, manufacturing and analysis for an indexable carbide inserted blade cutting hob of planar double-enveloping circular worm drive
Y.W. Cai, L.G. Yao, J. Zhang, G.P. Liu & C.S. Fang
Manufacturing method of large-sized cylindrical worm gear with Neiman profile using CNC combined machine tool
K. Kawasaki & I. Tsuji
A study on the crest width of the edge tooth of a modified TA worm
C. Huai, Y. Zhao & Y. Zhang
Effects of the center distance setting error on the helix error of a planar enveloping hourglass worm
F. He, Z. Shi & B. Yu
Analysis of the characteristics of toroidal drive with different types of internal gears and central worms
X.L. Zeng, L.G. Yao, J. Zhang, W.J. Li & X.L. Zeng
Biography
Datong Qin is currently a professor at Chongqing University, China. His research fields cover the design and applications of the mechanical transmission systems, and the vehicle power transmission and comprehensive control. He has published more than 250 academic journal papers. He currently serves as administrative member of the International Federation for the Promotion of Mechanism and Machine Science (IFToMM), and member of the International gear and transmission technology committee. Datong is on the editorial board of many academic journals including Journal of Mechanical Engineering, Journal of Mechanical Transmissions, Chinese Journal of Mechanical Engineering and China Journal of Highway and Transport.