Materials Science

Metals & Alloys

Per Page:
Sort:

Creep and Long-Term Strength of Metals

A. M. Lokoshchenko
December 20, 2017

Creep and Creep Rupture of Metals is devoted to the fundamental description of the phenomenon of creep which occurs widely in high-temperature deformation of metals. Special attention is paid to the analysis of long-term strength, which characterizes the stress at which the metal does not fail...

Amorphous-Nanocrystalline Alloys

A.M. Glezer, N.A. Shurygina
December 20, 2017

Amorphous-nanocrystalline alloys are a relatively new class of materials born from the rapid development of new technologies and different methods of producing amorphous and nanocrystalline powders and films, compacting, melt quenching, megaplastic deformation, implantation, laser, plasma, and...

Ultrasonic Treatment of Light Alloy Melts, Second Edition

Georgy I. Eskin, Dmitry G. Eskin
November 22, 2017

Spawned by growing interest in ultrasonic technology and new developments in ultrasonic melt processing, the Second Edition of Ultrasonic Treatment of Light Alloy Melts discusses use of ultrasonic melt treatment in direct-chill casting, shape casting, rapid solidification, zone refining, and more,...

Bulk Metallic Glasses, Second Edition

C. Suryanarayana, A. Inoue
November 16, 2017

Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses has been thoroughly updated and remains essential reading on the subject. It incorporates major advances in glass forming ability, corrosion behavior, and mechanical properties. Several of the newly...

Metalworking Fluids, Third Edition

Jerry P. Byers
September 20, 2017

This revised and expanded Third Edition contains 21 chapters summarizing the latest thinking on various technologies relating to metalworking fluid development, laboratory evaluation, metallurgy, industrial application, fluid maintenance, recycling, waste treatment, health, government regulations,...

Biohydrometallurgical Recycling of Metals from Industrial Wastes

Hong Hocheng, Mital Chakankar, Umesh Jadhav
September 11, 2017

Although many available metal recycling methods are simple and fast, they are also expensive and cause environmental pollution. Biohydrometallurgical processing of metals offers an alternative to overcome these issues, as the use of biological means not only helps to conserve dwindling ore...

Thermal and Time Stability of Amorphous Alloys

A. M. Glezer, A. I. Potekaev, A. O. Cheretaeva
August 14, 2017

This reference is dedicated to the problem of time-temperature stability of amorphous (non-crystalline) metal alloys with strongly nonequilibrium structure and unique physical and mechanical properties that are obtained by quenching from the melt at a rate that exceeds one millions of degrees c.o.s...

Plastic Deformation of Nanostructured Materials

A.M. Glezer, E.V. Kozlov, N.A. Koneva, N. A. Popova, I. A. Kurzina
August 10, 2017

Plastic Deformation of Nanostructured Materials offers comprehensive analysis on the most important data and results in the field of materials strength and mechanics. This reference systematically examines the special features of the mechanical behavior and corresponding structural mechanisms of...

Friction Stir Welding: Dissimilar Aluminium Alloys

Noor Zaman Khan, Arshad Noor Siddiquee, Zahid Akhtar Khan
August 01, 2017

The evolution of mechanical properties and its characterization is important to the weld quality whose further analysis requires  mechanical property and microstructure correlation. Present book addresses the basic understanding of the Friction Stir Welding (FSW) process that includes effect...

Hydrogenation with Low-Cost Transition Metals

Jacinto Sa, Anna Srebowata
July 26, 2017

Hydrogenation with Low-Cost Transition Metals describes recent developments in the preparation of catalysts and their catalytic abilities in chemoselective hydrogenation for the production of fine chemicals and pharmaceutical compounds. Emphasizing the use of low-cost metals (Cu, Ni, Fe, and Ag)...

Biogeochemistry of Trace Metals: Advances In Trace Substances Research

Domy C. Adriano
July 13, 2017

Biogeochemistry of Trace Metals is a compendium of the most recent information available on the effects of trace metals in soil quality and its potential threat on the transfer of these contaminants to consumers. Most of the chapters in the book were presented as papers during the First...

Joining Technology of gamma-TiAl Alloys

Sonia Luisa dos Santos Simoes, Filomena Maria da Conceicao Viana, Manuel Fernando Goncalves Vieira
July 11, 2017

The book covers the development of new technologies for the joining of TiAl alloys that result in sound bonds obtained in less demanding conditions. It discusses joint processing, microstructural and mechanical characterization, and summarizes developments in new approaches to the joining of TiAl...

Conferences

Year: