1st Edition

Bituminous Mixtures and Pavements VII Proceedings of the 7th International Conference 'Bituminous Mixtures and Pavements' (7ICONFBMP), June 12-14, 2019, Thessaloniki, Greece

Edited By A.F. Nikolaides, E. Manthos Copyright 2019

    Highway engineers are facing the challenge not only to design and construct sustainable and safe pavements properly and economically. This implies a thorough understanding of materials behaviour, their appropriate use in the continuously changing environment, and implementation of constantly improved technologies and methodologies. Bituminous Mixtures and Pavements VII contains more than 100 contributions that were presented at the 7th International Conference ‘Bituminous Mixtures and Pavements’ (7ICONFBMP, Thessaloniki, Greece 12-14 June 2019). The papers cover a wide range of topics:

    - Bituminous binders
    - Aggregates, unbound layers and subgrade
    - Bituminous mixtures (Hot, Warm and Cold)
    - Pavements (Design, Construction, Maintenance, Sustainability, Energy and environment consideration)
    - Pavement management
    - Pavement recycling
    - Geosynthetics
    - Pavement assessment, surface characteristics and safety
    - Posters

    Bituminous Mixtures and Pavements VII reflects recent advances in highway materials technology and pavement engineering, and will be of interest to academics and professionals interested or involved in these areas.

    Session I: Bituminous binders

    Recycled waste plastic modification of bituminous binder
    Greg White & Gordon Reid

    Rheological properties of fresh and RAP bitumen blends with or without regenerating agent
    A. Forton, H. Di Benedetto, S. Mangiafico, C. Sauzéat & P. Marc

    Calorimetry of Cement Modified Emulsified Asphalt incorporated with Rice Husk Ash
    Zhuangzhuang Liu, Zhenqiang Han & Aimin Sha

    Fatigue resistance of asphalt mastic by Dynamic Shear Rheometer testing
    M. Hospodka & B. Hofko

    Evaluation of fatigue parameters on polymer modified waxy bitumens
    J. Oner & B. Sengoz

    Investigation of the ship-generated waste as binder modifier
    H.I. Ozturk, F. Kamran & M. Guler

    Experimental study of bituminous binders’ viscosity and structure
    E. Remisova, M. Holy & V. Zatkalikova

    Aging behavior of bitumen and elastomer modified bitumen
    J. Zicans, T. Ivanova, R. Merijs-Meri, R. Berzina & V. Haritonovs

    Development of polyolefine elastomer modified bitumen and characterization of its rheological and structural properties
    R. Merijs-Meri, A. Abele, J. Zicans & V. Haritonovs

    Bond strength recovery of tack coat in RCC-base composite pavements
    Young Kyu Kim, Seung Woo Lee, Kyong Ku Yun, In Tae Kim & Cheol Woo Park

    Impact of aging on Gilsonite and Trinidad Epuré modified binders resistance to cracking
    M. Bilski & M. Słowik

    Effects of a surfactant-wax additive based on the activation energy and aging index of asphalt binders
    B. Golchin, M.O. Hamzah & C. Raab

    Modeling of creep and recovery of Gilsonite and Trinidad Epuré modified asphalt binders
    M. Słowik & M. Bilski

    Rheo-mechanical analysis of bitumens produced with green binder extenders
    G. Tarsi, F. Mazzotta & C. Sangiorgi

    Impact of seasonal fluctuations and provenience of bitumen on lifetime of asphalt pavement
    P. Sivapatham & N. Simmleit

    Session II: Aggregates, unbound layers and subgrade

    Re-evaluation of Polished Stone Value and British Pendulum Tester data to better understand aggregate polishing
    M. Mac Nicholas & D. Woodward

    Gene expression programming based prediction of Uncompacted Void Content of aggregate
    Abhary Eleyedath, Aravind Krishna Swamy & G. V. Ramana

    Shear strength behavior of stabilized unsaturated expansive subgrade soils for highway backfill
    I. Frank Aneke, M. Mostafa Hassan & A. Moubarak

    Prediction model for subgrade soil resilient dynamic modules utilizing basic soil characteristics for the state of louisiana
    Mayzan Isied & Mena Souliman

    Session III: Bituminous mixtures (Hot, Warm and Cold)

    Graphite modification of an AC to mitigate UHI effects
    A.T. Papagiannakis & R. Kaphleb

    Effect of moisture on the adhesion of aggregate–binder systems
    P.D.C. Nageswaran, A. Varveri, A. Scarpas & S. Mohan

    Development of a Ravelling test for asphalt
    J.C. Nicholls, M.M.J. Jacobs, E. Schoen, D. van Vliet, S. Mookhoek, N. Meinen, J. De Visscher, A. Vanelstraete, G.G. van Bochove, F. Hammoum, T. Blumenfeld, S. Bohm & C. Schulze

    Impact of laboratory compaction-based HMA stiffness on flexible pavement analysis
    P. Georgiou, A. Loizos, A. Leventis & K. Gkyrtis

    VAPro – long-term ageing of HMA based on highly oxidant gases
    D. Maschauer, D. Steiner & B. Hofko

    Comparison of shear strength parameters obtained from different protocols for wearing course mixtures
    N.T. Tran & O. Takahashi

    Determination of bitumen stone coverage by digital image processing
    J. Blom, B. De Boeck & H. Soenen

    Developing the next generation of asphalt surfacings, from conception to road trials
    C. Ojum, I. Widyatmoko, R. Hudson-Griffiths, A. Khojinian, D. Giles, M. Lancaster, G. Schofield, C. Southwell, D. Markham, M. Simms & T. Smith

    Effects of reclaimed asphalt and warm mix asphalt on the availability of the road network
    J.C. Nicholls, M. Wayman, A. Varveri, S. King & S. Cassidy, K. Mollenhauer, C. McNally & A. Tabakovic

    Physical and mechanical properties of warm mix asphalt composed of recycled concrete aggregates
    J. Neves, J. Lameirão & A.C. Freire

    Accelerated durability testing of preserved asphalt mixtures using the Immersion Ageing test
    C. Ojum, I. Widyatmoko, A. Khojinian & N. Thompson

    Cyclic interlayer testing in bituminous pavements
    D. Ragni, A. Graziani & F. Canestrari

    Effect of curing on the indirect tensile failure energy of cement-bitumen treated materials
    C. Mignini, F. Cardone, A. Graziani, A. Morbi & L. Setti

    Improving the quality of emulsion-mineral mixtures
    B.G. Pecheny, A. Nikolov & S. Nikolova

    Use of stabilized blast furnace slag in asphalt mixtures
    Pavla Vacková & Jan Valentin

    Long term performance of HMAs having up to 100% of municipal incinerator sands
    E. Toraldo, E. Mariani, D. Topini & M. Crispino

    Whitish and rusty stains on bituminous wearing course: Possible causes
    N. Ciont, M. Iliescu, G. Hoda & N. Har

    The SCB configuration for the determination of the dynamic modulus of asphalt mixtures
    S.M. Angelone, M. Cauhape Casaux & F.O. Martinez

    Asphalt concrete mechanical behavior prediction by Artificial Neural Networks
    M. Pasetto, N. Balbo & E. Manthos

    A method for determining the appropriate frequency for testing asphalt mixtures in the laboratory
    Saman Barzegari & M. Solaimanian

    Synthesis and characterization of encapsulated healing agents for asphalt
    R. Casado Barrasa, C. Martin-Portugués Montoliu, L. Miranda Pérez & F.J. Lucas Ochoa

    Comparison of uniaxial tension-compression fatigue test results with SCB test performance indicators developed for performance-based mix design procedure
    A. Seitllari, M. Lanotte & M.E. Kutay

    Characterization of hot mix asphalt patching materials produced with medium-scale field mixing equipment
    Ben C. Cox & John B. Sprouse

    Experimental investigation on performance of asphalt mixture with aggregate of acid migmatite – a case study
    Erhu Yan, Zhenyu Zhou, Yongchun Qin, Jie Wang, Songchang Huang, Yan Gong & Xuewen Huang

    A study on the field application of ultra-thin hot mix asphalt with CSM modifier for sustainable road in Korea
    Y.I. Kim & N. Moustapha

    The effect of oxidative aging to characteristic properties of semi-open AC with blast furnaced slag and to penetration and softening point of recovered bitumen
    E. Manthos & A. Nikolaides

    Development of probabilistic S-N curve using small sample data
    Himanshu Sharma & Aravind Krishna Swamy

    Session IV: Pavements (Design, Construction, Maintenance, Sustainability, Energy and environment consideration)

    Determination of asphalt layer thickness above which load-induced strains initiate top-down cracking and the effect of asphalt stiffness variation between wearing course and rest of asphalt layers
    A. Nikolaides & E. Manthos

    Improving pavement’s properties using the AMIR II compactor
    Christiane Raab, Abd El Halim Omar Abd El Halim & Anandkumar Rajendran Chelliah

    A methodology to design the asphalt field compaction process in the laboratory to provide clear guidelines for roller operators
    F.R. Bijleveld, A.H. de Bondt & R.N. Khedoe

    The use of thermal infrared line scanner as a qualitative tool for asphalt paving process – a case study
    G. Jacobs, W. Van den bergh, J. Blom & L. Lauriks

    Sensitivity analysis of mechanistic-empirical pavement structural design methods considering climate impacts on layer modulus values
    W. Uddin, Rulian Barros & Zul Fahmi M. Jaafar

    The permissible temperature of newly laid asphalt at opening to airfield traffic
    T. Rahman, A. Dawson & N. Thom

    Comparing asphalt preservation products on a grooved runway
    Greg White, Fraser McLachlan & Scott Wallace

    Designing airfield pavements to prevent distresses and enhance aircraft safety
    J.V. Merighi & W. Uddin

    Experimental investigation of temperature distribution in non-heated and pre-heated hot mix asphalt patch repair
    J. Byzyka, M. Rahman & D.A. Chamberlain

    A methodology to quantify the impact of climate change on the state of good repair of pavements
    C.M. Chang & O. Ortega

    Field performance of hot applied modified binder chip seal in California
    A. Rahim, S. Saadeh, O. Aljairi & D. Cheng

    An eco-efficient induction healing approach for asphalt mixtures
    M. Vila-Cortavitarte, D. Jato-Espino, D. Castro-Fresno & M.Á. Calzada-Pérez

    The selection of pothole repair options
    J.C. Nicholls, M. McHale & I. Carswell

    Transportation infrastructure impact: Energy and environmental life cycle assessment
    M. Giunta, M. Mistretta, F.G. Praticò & T.M. Gulotta

    Solar pavement: A new source of energy
    Fotini Kehagia, Stefania Mirabella & Constantinos S. Psomopoulos

    Field evaluation of a sustainable road structure concept
    R. Casado Barrasa, C. Martín-Portugués Montoliu, K.J. Kowalski & J.B. Król

    Incorporation of reliability in the pavement design process: Concepts and issues
    Abhishek Mittal & Aravind Krishna Swamy

    Large-scale investigations of precast concrete slabs
    J. Patzak & P. Bolz

    Session V: Pavement management

    NDT platform for structures management and decision support in emergency situations
    F.G. Praticò, R. Fedele, M. Merenda, R. Carotenuto & F.G. Della Corte

    Cost analysis of a flexible pavement with and without lime stabilization: A provincial road case in Turkey
    M. Özgenel

    Infrastructure resilience: From concept to performance to decisions
    S. McNeil, Y. Liu & A.S. Ramirez-Villamizar

    Economic optimisation of road network accessibility
    M.R.F. Amrozi & H.T. Evdorides

    Functional maintenance evaluation targets for flexible runway pavement
    L.F. Merighi & C.Y. Suzuki

    Evaluation of pavement maintenance and strengthening techniques
    A. Mouratidis, C.G. Daniilidou & G.P. Papageorgiou

    Session VI: Pavement recycling

    Influence of mixing procedures on the performance of asphalt mixtures with high reclaimed asphalt content
    A. Margaritis, G. Jacobs, N. Hasheminejad, J. Blom & W. Van den Bergh

    Experimental investigation of the re-recycling of RAP in asphalt pavement
    D. Wang, A. Cannone Falchetto, K.H. Moon, C. Riccardi & M.P. Wistuba

    Incorporating RAP into airport asphalt resurfacing
    Greg White

    Cold recycling of reclaimed asphalt: Analysis of alternative procedures
    M. Pasetto, A. Baliello, G. Giacomello & E. Pasquini

    Quality-control procedure for dry-process rubberised asphalt mastics
    A. Astolfi, A. Subhy, F.G. Praticò & D. Lo Presti

    The performance of asphalt concrete with increased RA content – laboratory design vs. trial section
    Pavla Vacková & Jan Valentin

    Laboratory evaluation of Dense Bituminous Macadam prepared using Recycled Concrete Aggregate
    K. Tanveeer Bhushan & S. Shankar

    Effect of Cyclogen as rejuvenator in 100% recycled asphalt mixtures
    Ali Moniri, Mahmood Khadem & Yasha Saghafi

    Session VII: Geosynthetics 587

    Fatigue resistance of a grid-reinforced asphalt concrete using four point bending beam test
    M. Orešković, S. Trifunović, G. Mladenović & Š. Bohuš

    Performance testing of a steel cord based crack-preventing interlayer
    F. Vervaecke, H. Cornelus & P. Straubinger

    Parameter to ensure a durable grid-reinforced asphalt pavement
    Andreas Elsing & Fabiana Leite-Gembus

    Session VIII: Pavement assessment, surface characteristics and safety

    Performance assessment of non-conventional pavements using back-analysis techniques
    V. Papavasiliou, A. Loizos, C. Plati & T. Stergiou

    Comparing mother wavelet selection criteria for road pavements NDT monitoring
    R. Fedele, F.G. Praticò, R. Carotenuto, and F.G. Della Corte

    Surface properties of porous asphalt concretes: Time, position, and treatment impact
    F.G. Praticò, G. Colicchio, R. Fedele & P.G. Briante

    Measuring skid resistance of grooved pavements
    L. Chu & T.F. Fwa

    From Mean Texture Depth to Mean Profile Depth: Exploring possibilities
    C. Plati, M. Pomoni & T. Stergiou

    FE model of circular Accelerated Pavement Testing setup to study the optimal layout configuration of multiple pavements
    S. Aggarwal, K. Anupam, T. Tang, C. Kasbergen, S.M.J.G. Erkens & A. Scarpas

    Laboratory investigation of the landing aircraft tire contact patch
    J. Ferguson, D. Woodward & P. Millar

    A practical approach to determine asphalt concrete material properties based on non-destructive testing
    I. Boz & M. Solaimanian

    Criteria for the selection of safety barriers systems on road networks
    A.L. Nikiforiadis & A.A. Nikiforiadis

    Life-cycle safety rating of road maintenance works
    A.E. Azmi & H. Evdorides

    Application of machine learning techniques to predict asphalt pavement surface deteriorations
    R. Muzzulini, M. Pagola & O. Giovanon

    Poster Session

    Influence of filler types and their quantities on bitumen-aggregate adhesion
    J. Choudhary, B. Kumar & A. Gupta

    Performance of asphalt determined by the tensile creep test on binder and asphalt mortar
    F. Bommert & F. Münscher

    MSCR analysis of rubberized asphalt binders containing wax additives
    Soon-Jae Lee, Soo-Ahn Kwon, Sung-Il Jeon & Moon-Sup Lee

    Impact of synthetic fibres on asphalt concrete mix
    C.G. Daniel, X. Liu, P. Apostolidis, S. Erkens & A. Scarpas

    Biography

    A.F. Nikolaides, Aristotle University of Thessaloniki (AUTh), Greece
    E. Manthos, Aristotle University of Thessaloniki (AUTh), Greece