1st Edition

Concrete Segmental Bridges Theory, Design, and Construction to AASHTO LRFD Specifications

By Dongzhou Huang, Bo Hu Copyright 2020
    1028 Pages 840 B/W Illustrations
    by CRC Press

    1028 Pages 840 B/W Illustrations
    by CRC Press

    Segmental concrete bridges have become one of the main options for major transportation projects world-wide. They offer expedited construction with minimal traffic disruption, lower life cycle costs, appealing aesthetics and adaptability to a curved roadway alignment. The literature is focused on construction, so this fills the need for a design-oriented book for less experienced bridge engineers and for senior university students.





    It presents comprehensive theory, design and key construction methods, with a simple design example based on the AASHTO LRFD Design Specifications for each of the main bridge types. It outlines design techniques and relationships between analytical methods, specifications, theory, design, construction and practice. It combines mathematics and engineering mechanics with the authors’ design and teaching experience.

    Unit Conversion Factors

    Preface

    Principal Notations

    Chapter I. Introduction to Concrete Segmental Bridges

    Chapter II. Loads on Bridges and General Design Methods

    Chapter III. Fundamentals of Segmental Bridge Analysis and Design

    Chapter IV General Analytical Theory of Superstructures

    Chapter V. Design of Span-By-Span Construction and Common Details of Segmental Bridges

    Chapter VI. Design of Cantilever Segmental Bridges

    Chapter VII. Design of Incrementally Launched Segmental Bridges

    Chapter VIII. Design of Post-Tensioned Spliced Girder Bridges

    Chapter IX. Design of Segmental Arch Bridges

    Chapter X. Design of Concrete Segmental Cable-Stayed Bridges

    Chapter XI. Design of Substructures

    Chapter XII. Segmental Bridge Construction

    Appendices

    1. AASHTO-PCI-ASBI Segmental Box Girder Standards
    2. Typical Post-Tensioning Systems by Freyssinet and TENSA

    Biography

    Dongzhou Huang, Ph.D., P.E., is Chief Engineer of Atkins North America and President of American Bridge Engineering Consultants, and has been a professor and visiting professor at Tongji University, Fuzhou University, and Florida International University for more than 20 years. He has been engaged in bridge engineering for over 40 years and has published numerous papers and books on bridge design, dynamic and stability analysis, practical analysis methods, and capacity evaluations of different types of bridges, including box girder, curved girder, cable-stayed, truss, and arch bridges. He has been extensively involved in the design, analysis, and construction of different types of long span and complex bridges, including span-by-span constructed, precast and cast-in-place cantilever segmental bridges, cable-stayed bridges, and arch bridges. He is an editor/board member of Journal of Structural Engineering International, IABSE and former associate editor of Journal of Bridge Engineering, ASCE.



    Bo Hu, Ph.D., P.E., P.Eng., is an associate technical director in the Edmonton office of COWI. He obtained his Ph.D. in civil engineering from the University of Delaware in 2006. He has been engaged in bridge engineering for 20 years with research and design experiences in various bridge types, seismic behaviors of bridge structures, seismic design methodology for bridge structures, and development of innovative structures. He is a professional engineer in the United States and Canada and has been playing leading technical and project roles in a variety of large bridge projects in North America, including segmental concrete girder bridges, extradosed concrete segmental bridges, and cable-stayed concrete segmental bridges.

    'Authors Dongzhour Huang and Bo Hu should be commended for their detailed tome. . . . The textbook is sure to become a useful reference for both students and practicing engineers due to its substantial breadth of information, from basic engineering principles to detailed bridge design examples.'

    C. J. Freeman, Florida Dept. of Transportation, USA, Journal of Bridge Engineering