1st Edition

Analysis and Design of Marine Structures V

Edited By C. Guedes Soares, R.A. Shenoi Copyright 2015

    Analysis and Design of Marine Structures V contains the papers presented at MARSTRUCT 2015, the 5th International Conference on Marine Structures (Southampton, UK, 25-27 March 2015).

    The MARSTRUCT series of conferences started in Glasgow, UK in 2007, the second event of the series took place in Lisbon, Portugal (2009), while the third was in Hamburg, Germany (2011), and the fourth in Espoo, Finland (2013). This conference series deals with Ship and Offshore Structures, addressing the following topics:

    – Methods and Tools for Loads and Load Effects

    – Methods and Tools for Strength Assessment; Experimental Analysis of Structures

    – Materials and Fabrication of Structures

    – Methods and Tools for Structural Design and Optimisation

    – Structural Reliability, Safety and Environmental Protection

    This book is essential reading for academics, engineers and all professionals involved in the area of design of marine and offshore structures.

    Preface
    Organisation

    Wave loads and responses

    Experimental investigation of the influence of hull damage on ship responses in waves
    S.S. Bennett & A.B. Phillips

    Unstructured MEL scheme for 3D body nonlinear ship hydrodynamics
    A.C. Chapchap & P. Temarel

    An initial estimation of DP requirements for a non-moored operational FPSO
    G.E. Hearn & G.C. Bratu

    CFD based computation of bow impact loads for buckling assessment
    J. Oberhagemann, M. Radon, H. von Selle & D.K. Lee

    Comparison of two practical methods for seakeeping assessment of damaged ships
    J. Parunov, M. Ćorak & I. Gledić

    Smoothed Particle Hydrodynamics (SPH) method for modelling 2-dimensional free surface hydrodynamics
    M.Z. Ramli, P. Temarel & M. Tan

    Wave-induced responses of a bulk carrier in heading and following seas
    X.L. Wang, R.M. Liu & J.J. Hu

    Numerical simulation of the dynamics of a large moored tanker
    S. Zhang, Q. Jin, J. Xin, T. Li, P. Temarel & W. Geraint Price


    Hydroelasticity

    Slamming impact loads on high-speed craft sections using two-dimensional modelling
    J. Camilleri, D.J. Taunton & P. Temarel

    Non-linear hydroelastic and fatigue analyses for a very large bulk carrier
    B. Cristea, C.I. Mocanu & L. Domnisoru

    Hydroelastic analysis of a flexible barge in regular waves using coupled CFD-FEM modelling
    P. Lakshmynarayanana, P. Temarel & Z. Chen


    Vibrations

    Simplified method for natural frequency analysis of stiffened panel 1
    E. Avi, A. Laakso, J. Romanoff & I. Lillemäe

    Investigation of vibrational power flow patterns in damaged plate structures for damage localisation
    P. Boonpratpai & Y.P. Xiong

    Influence of the sea action on the measured vibration levels in the comfort assessment of mega yachts
    E. Brocco, L. Moro, P.N. Mendoza Vassallo, M. Biot, D. Boote, T. Pais & E. Camporese

    A computational framework for underwater shock response of marine structures 131
    C. Diyaroglu, D. De Meo & E. Oterkus

    Liquid sloshing analysis for independent tank with elastic supports
    W. Liu, H.X. Xue & W.Y. Tang

    Numerical simulation of the dynamic behaviour of resilient mounts for marine diesel engines
    L. Moro, E. Brocco, P.N. Mendoza Vassallo, M. Biot & H. Le Sourne

    Characteristic of low and middle frequency underwater noise of a catamaran
    F.Z. Pang, Y.Z. Xue, D. Tang, S. Li & Y.P. Xiong

    Simulation of the vibration characteristics of a propulsion system excited by hull deformations
    Z. Tian, X.P. Yan, C. Zhang & Y.P. Xiong

    A new approach to analyze the underwater vibration of double layer ribbed cylinder
    F. Wang, Y. Xiong, Z. Weng & L. He

    Impact resistance assessment of shipboard equipment considering spectrum dip effect
    Y.J. Yang, M. Yu, X.B. Li & L.H. Feng

    Natural frequencies of eccentric cylindrical shells filled with pressurized fluid
    G.J. Zhang, T.Y. Li, X. Zhu, L. Xiong & Y.P. Xiong

    Magnetorheological elastomer materials and structures with vibration energy control for marine application
    G. Zhu, Y.P. Xiong, S. Daley & R.A. Shenoi


    Fatigue

    Corrosion fatigue crack growth in offshore wind monopile steel HAZ material
    O. Adedipe, F. Brennan & A. Kolios

    Improvements in fatigue strength assessment of marine propellers
    C. Bertoglio, S. Gaggero, C.M. Rizzo, M. Viviani, C. Vaccaro & F. Conti

    Fatigue crack growth performance of laser hybrid and arc welds of AH36 naval steels
    E.V. Chatzidouros, T. Tsiourva, D.I. Pantelis & A. Lopez

    Overload and dwell time effects on crack growth property of high strength titanium alloy TC4 ELI used in submersibles
    F. Wang, W.C. Cui, Y.Y. Wang & Y.S. Shen

    Consideration of stress gradient effects for complex structures in local fatigue approaches
    C. Fischer & W. Fricke

    Fatigue assessment of joints at bulb profiles by local approaches
    C. Fischer, W. Fricke & C.M. Rizzo

    Fatigue life improvement of laser-welded web-core steel sandwich panels using filling materials
    D. Frank, J. Romanoff & H. Remes

    A full-scale fatigue test on longitudinal-through-bulkhead detail by using equivalent angle bar
    Q. Yi, J. Yue, Y. Liu, W. Tang & Z. He

    Springing effect on the fatigue life of an 8000TEU container ship
    P.-K. Liao, Y.-J. Lee, H.-J. Lin, S.-C. Tsai, H.-L. Chien, B.C. Chang & G.M. Luo

    A fracture mechanics based approach for the analysis of crack growth at weld joints of ship structures
    B.Q. Lou, S. Zhang, J. Tong, S. Wong, F. Cheng & S. Hirdaris

    A study on the effect of hull girder vibration on the fatigue strength
    M. Oka, T. Niwa & K. Takagi

    Fatigue strength of welded extra high-strength and thin steel plates
    H. Remes, M. Peltonen, T. Seppänen, A. Kukkonen, S. Liinalampi, I. Lillemäe, P. Lehto, H. Hänninen, J. Romanoff & S. Nummela

    Investigation of weld root fatigue of single-sided welded T-joints
    W. Sundermeyer, W. Fricke & H. Paetzold

    Fatigue data of High-Frequency Mechanical Impact (HFMI) improved welded joints subjected to overloads
    H.C. Yildirim & G. Marquis

    Application of wave models to fatigue assessment of offshore floating structures
    T. Zou, M.L. Kaminski & X.L. Jiang


    Structural analysis

    A simplified FE model for the non-linear analysis of container stacks subject to inertial loads due to ship motions
    E. Brocco, L. Moro & M. Biot

    Structural Health Monitoring of marine structures by using inverse Finite Element Method
    A. Kefal & E. Oterkus

    Method for estimating soft clay type seabed embedment by pipeline movement
    D.K. Kim, M.S. Liew, S.Y. Yu, K.S. Park & H.S. Choi

    Assumptions and reality: Stress states in uniaxial tension test
    M. Kõrgesaar

    Dynamic analysis of ring stiffened conical-cylindrical shell combinations with general coupling and boundary conditions
    X.L. Ma, G.Y. Jin, Y.P. Xiong & Z.G. Liu

    The determination of ice-induced loads on the ship hull from shear strain measurements
    M. Suominen, J. Romanoff, H. Remes & P. Kujala

    A study of cross deck effects on warping stresses in large container ships
    R. Villavicencio, S. Zhang & J. Tong

    Analysis on influence of spherical bulkhead reinforcement on stability
    S. Yuan, X.H. Miao & B. Luo


    Hull ultimate strength

    Structural capacity of an aging box girder accounting for the presence of a dent
    S. Saad-Eldeen, Y. Garbatov & C. Guedes Soares

    Strength analysis of ship shaped structures subjected to asymmetrical bending moment
    M. Tekgoz, Y. Garbatov & C. Guedes Soares

    A study on the effect of lateral loads on the hull girder ultimate strength of bulk carriers
    K. Toh & T. Yoshikawa

    Model test on the ultimate longitudinal strength of a damaged box girder
    Y. Yamada & T. Takami


    Ultimate strength

    Influence of shear-induced secondary bending on buckling of web-core sandwich panels
    J. Jelovica & J. Romanoff

    Influence of lateral pressure on load-shortening behavior of stiffened panels under combined loads
    L. Jiang & S. Zhang

    Elastic shear buckling capacity of the longitudinally stiffened flat panels
    S. Kitarovic, J. Andric & K. Piric

    Strength of aluminium alloy ship plating under combined shear and compression/tension
    M.S. Syrigou, S.D. Benson & R.S. Dow

    Effects of initial imperfection shapes on plate ultimate strength under combined loads
    S. Zhang & L. Jiang


    Damaged structures

    Statistics of still water bending moment of damaged ships
    B. Bužančić Primorac, M. Ćorak & J. Parunov

    Multiphysics modelling of Stress Corrosion Cracking by using peridynamics
    D. De Meo, C. Diyaroglu, N. Zhu, E. Oterkus & M. Amir Siddiq

    Progressive collapse of intact and damaged stiffened panels
    A. Leelachai, S.D. Benson & R.S. Dow

    Comparative analysis of HCSR based on ultimate strength of intact ships and residual strength in damaged condition
    W. Lei, W.Z. Quan & H.J. Hao

    Residual strength of a severely damaged box-girder with non-uniform and inter-crystalline corrosion
    S. Saad-Eldeen, Y. Garbatov & C. Guedes Soares


    Structural design

    Investigation into the implications of increasing minimum manhole access requirements in marine structures
    P. Eames, H. Hickson & J.M. Underwood

    Structural design and optimisation of an aluminium trimaran
    D. Fuentes, M. Salas, G. Tampier & C. Troncoso

    Efficient optimization framework for robust and reliable structural design considering interval uncertainty
    Y. Liu & M.D. Collette

    Multi-objective optimization of lightweight modular sandwich panels
    A. Milat, T. Tomac, D. Frank, Đ. Dundara, O. Kuzmanović & V. Radolović


    Fabrication technology

    Numerical investigation of welding induced distortion of a stiffened plate structure
    Z. Chen, Z.C. Chen & R.A. Shenoi

    Reduction in weld induced distortions of butt welded plates subjected to preventive measures
    M. Hashemzadeh, Y. Garbatov & C. Guedes Soares

    Buckling mitigation of stiffened panels through thermomechanical tensioning
    N.R. Mandal, S. Kumar, D. Podder, A. Gadagi & T. Mathew

    Numerical analysis of residual stress in butt-welded High Tensile Strength steel structures
    Y.X. Wan, Y.P. Xiong & L.B. Li


    Composite structures

    Comparison of effective breadth definitions large composite top-hat stiffened grillages
    E. Arnaud, A.J. Sobey & J.I.R. Blake

    Static and fatigue tests of hybrid composite-to-steel butt joints
    E.A. Kotsidis, P. Yarza, N.G. Tsouvalis, R. de la Mano & E. Rodriguez-Senín

    Mechanical characterization of yachts and pleasure crafts fillers
    G. Nebbia, C.M. Rizzo, M. Gaiotti & A. Caleo

    Composite riser design and development—A review
    D.-C. Pham, S. Narayanaswamy, X. Qian, W. Zhang, A.J. Sobey, M. Achintha & R.A. Shenoi

    Steel or composite car deck structure—a comparison analysis of weight, strength and cost
    J.W. Ringsberg


    Crashworthiness

    Numerical crashworthiness analysis of an offshore wind turbine monopile impacted by a ship
    A. Bela, L. Buldgen, Ph. Rigo & H. Le Sourne

    Development of a failure strain surface in average stress triaxiality and average lode angle domains of a low temperature high strength steel
    J. Choung, S.J. Park & G.T. Tayyar

    Structural response of ship bottom floor plating during shoal grounding
    Z.G. Gao & Z.Q. Hu

    Non-linear finite element analysis of crashworthy shields of offshore wind turbine supporting structures
    B. Liu, Y. Garbatov & C. Guedes Soares

    Modelling of structural damage and environmental consequences of tanker grounding
    K. Tabri, R. Aps, A. Mazaheri, M. Heinvee, A. Jönsson & M. Fetissov


    Renewable energies devices

    A study on the short and long-term analysis of nonlinear hydrodynamic force on an Energy Saving Device
    D.B. Lee, H.J. Kim & B.-S. Jang

    Numerical simulation of multi-body wave point-absorber
    L. Li, M. Tan & J.I.R. Blake

    Optimized topology design for substructure of 10MW grade floating type Wave-Wind Hybrid Power Generation System
    C.Y. Song, H.C. Song, C.S. Shim, J.H. Park & Y.Y. Park

    Fatigue reliability of an offshore wind turbine supporting structure accounting for inspection and repair
    B. Yeter, Y. Garbatov & C. Guedes Soares


    Uncertainty and reliability

    System reliability analysis of a ship deck structure for buckling collapse and corrosion limit states
    B. Gaspar & C. Guedes Soares

    Effect of the aspect ratio on the ultimate compressive strength of plate elements with non-uniform corrosion
    B. Gaspar, A.P. Teixeira & C. Guedes Soares

    Uncertainty analysis of the energy absorbed in beam and plate elements under impulsive loading
    B. Liu & C. Guedes Soares

    Effects of input uncertainty on composite patch disbond under impact loading
    S.C. TerMaath & D.C. Hart

    Experimental study on the rear bearing load characteristics considering uncertainty external loading
    S.D. Zhang, Z.L. Liu, X.P. Yan, Y. Jin & B. Qin

    Author index

    Biography

    Carlos Guedes Soares