1997 Masonry Codes and Specifications

1997 Masonry Codes and Specifications

Published:
Author(s):
Free Standard Shipping

Purchasing Options

Hardback
$98.95
Add to cart
ISBN 9780849375484
Cat# MI7548
 

Features

  • Metrication included for reference throughout the text
  • 1997 Uniform Building Code
  • 1997 Uniform Building Code Standards
  • Uniform Building Code - 1995 California Building Code
  • 13 Current ASTM Standards
  • 9 Guide Specifications for Masonry in the CSI Format
  • BIA Technical Notes
  • TEK Manual for Concrete, Masonry Design and Construction (NCMA Technical Notes)
  • Cross Reference UBC/ACI
  • Cross Reference ACI/UBC
  • Summary

    The Masonry Institute of America believes that the best way to extend and improve the use of masonry is through education and dissemination of information. Following a long tradition of such ideals, the 1997 Masonry Codes and Specifications is a ready reference that furnishes, in one document, the various code requirements for masonry from the Uniform Building Code and Standards, the California State Building Code, and the American Society for Testing and Materials (ASTM) Standards that govern the specification of quality and testing of materials. The book includes Guide Specifications for masonry construction set forth in the CSI format with notes to the specifier.

    Table of Contents

    Introduction
    Uniform Building Code, 1997 Edition
    Preface
    1997 UBC Chapter 1, Administration - Alternate Materials, Alternate Design and Methods of Construction
    1997 UBC Chapter 16, Structural Design Requirements
    1997 UBC Chapter 17, Structural Tests and Inspections
    1997 UBC Chapter 21, Masonry
    1997 UBC Chapter 14, Exterior Wall Coverings - Veneer
    1997 UBC Chapter 31, Special Construction - Chimneys, Fireplaces and Barbecues
    1997 Chapter 7, Fire-Resistant Materials and Construction
    1997 UBC Chapter 21 Appendix, Prescriptive Masonry Construction in High-Wind Areas
    Uniform Building Code Standards, 1997 Edition
    Preface
    1997 UBC Standard 7-7, Methods for Calculating Fire Resistance of Steel, Concrete, Wood, Concrete Masonry and Clay Masonry Construction
    1997 UBC Standard 21-1, Building Brick, Facing Brick and Hollow Brick (Made from Clay or Shale)
    1997 UBC Standard 21-2, Calcium Silicate Face Brick (Sand-Lime Brick)
    1997 UBC Standard 21-3, Concrete Building Brick
    1997 UBC Standard 21-4, Hollow and Solid Load-Bearing Concrete Masonry Units
    1997 UBC Standard 21-5, NonLoad-Bearing Concrete Masonry Units
    1997 UBC Standard 21-6, In-Place Masonry Shear Tests
    1997 UBC Standard 21-7, Tests of Anchors in Unreinforced Masonry Walls
    1997 UBC Standard 21-8, Pointing of Unreinforced Masonry Walls
    1997 UBC Standard 21-9, Unburned Clay Masonry Units and Standard Methods of Sampling and Testing Unburned Clay Masonry Units
    1997 UBC Standard 21-10, Joint Reinforcement for Masonry
    1997 UBC Standard 21-11, Cement Masonry
    1997 UBC Standard 21-12, Quicklime for Structural Purposes
    1997 UBC Standard 21-13, Hydrated Lime for Masonry Purposes
    1997 UBC Standard 21-14, Mortar Cement
    1997 UBC Standard 21-15, Mortar for Unit Masonry and Reinforced Masonry Other than Gypsum
    1997 UBC Standard 21-16, Field Test Specimens for Mortar
    1997 UBC Standard 21-17, Test Method for Compressive Strength of Masonry Prisms
    1997 UBC Standard 21-18, Method of Sampling and Testing Grout
    1997 UBC Standard 21-19, Grout for Masonry
    1997 UBC Standard 21-20, Standard Test Method for Flexural Bond Strength of Mortar Cement
    Uniform Building Code - 1995 California Building Code
    Introduction
    Preface
    1995 UBC Chapter 21A, Masonry
    1995 UBC Chapter 14A, Exterior Wall Coverings - Veneer
    1995 UBC Chapter 31, Special Construction - Chimneys, Fireplaces and Barbecues
    ASTM Standards
    The American Society for Testing and Materials
    ASTM A951-96, Masonry Joint Reinforcement
    ASTM C62-96, Building Brick (Solid Masonry Units Made from Clay or Shale)
    ASTM C67-96, Sampling and Testing Brick and Structural Clay Tile
    ASTM C90-96a Loadbearing Concrete Masonry Units
    ASTM C140-96b, Sampling and Testing Concrete Masonry Units
    ASTM C216-95a, Facing Brick (Solid Masonry Units Made from Clay or Shale)
    ASTM C270-96a, Mortar for Unit Masonry
    ASTM C652-97, Hollow Brick (Hollow Masonry Units Made from Clay or Shale)
    ASTM C902-95, Pedestrian and Light Traffic Paving Brick
    ASTM C1019-89a, (Reapproved 1993), Sampling and Testing Grout
    ASTM C1088-96, Thin Veneer Brick Units Made from Clay or Shale
    ASTM C1314-95, Constructing and Testing Masonry Prisms Used to Determine Compliance with Specified Compressive Strength of Masonry
    ASTM E447-92b, Compressive Strength of Masonry Prisms
    Selected Quality Control Standards
    Brick Absorption and Compressive Strengths of Masonry Materials
    Masonry Prism Testing
    Guide Specifications
    Mortar
    Grout
    Reinforced Grouted Brick Masonry
    Reinforced Concrete Unit Masonry
    Anchored Veneer
    Adhered Thin Clay Brick or Stone Slab Masonry Veneer
    Glass Unit Masonry
    Brick Water-Repellent Coating
    Clear Water Repellents for Concrete Unit Masonry
    BIA Technical Notes: Subject Heading Index
    TEK Manual for Concrete Masonry Design and Construction
    Cross Reference UBC/ACI
    Cross Reference ACI/UBC
    Index

    Textbooks
    Other CRC Press Sites
    Featured Authors
    STAY CONNECTED
    Facebook Page for CRC Press Twitter Page for CRC Press You Tube Channel for CRC Press LinkedIn Page for CRC Press Google Plus Page for CRC Press
    Sign Up for Email Alerts
    © 2013 Taylor & Francis Group, LLC. All Rights Reserved. Privacy Policy | Cookie Use | Shipping Policy | Contact Us